Binary Analysis with Firmware Analysis and Comparison Tool FACT
By default, it shows data in the binary little-endian format that you can easily change to big-endian format. Let’s take a look at some of the important editing features of this software.
This is done by connecting our serial-to-USB converter TX and RX pins to the ESP RX and TX pins and powering the chip with the 3.3V and GND pins. If you’re intimidated by soldering there are 3D printed jigs available for different modules and devices. At worst, you could get away with holding the headers tightly with jumper wires in pin holes during flashing but it is not …